TIMKEN 6024-ZZ Single Row Ball Bearings

Screw Type:Metric (fine) Thread; Days to Ship:6 Days; Shape:Round shape; Screw Type:Metric (fine) Thread; Type:Lock Nut; Type:Lock Nut; Thread Nominal M(mm):M12; Pitch (p):1; RoHS:6; Material:304 Stainless Steel;

S:25.4 mm; Recommended tightening torque for set screw:22 Nm; Designation of open end cover:SCO212-60; Z:60.8 mm; C:52.5 kN; T min.:-40 °C; C0:32.8 kN; s1:32.55 mm; Designation of bearing:UC212G2T04; A5:39.7 mm;

d:70 mm; C:62 kN; S:30.2 mm; C0:45 kN; A2:82.4 mm; B:74.6 mm; G:R1/8"; Designation of housing:FE214-; L:188 mm; A1:18 mm;

RoHS:6; Number of Bearings:Single; Days to Ship:8 Days; Bearing Retained:Yes (with retaining; Holder Surface Treatment:Not Provided; Type:Bearings with Housin; Width T(mm):12; Shape:Flange Type; Volume Discount:Available; Shape:Flange Type;

Seals:ZZ (Double Shield); Volume Discount:Available; Bearing I.D. d(mm):15; RoHS:6; Volume Discount:Available; Type:Bearings with Housin; Flange Shape:Compact Type; Type:Bearings with Housin; Width T(mm):12; Number of Bearings:Single;

Housing Style:Two-Bolt Pillow Bloc; Eng Internal Radial Clearance - Min:0.0043; UPC Code:0883450133227; Bearing Number:22217; Dimension G:3.0000 in; Dimension H:1.33 in; Grease Lubrication - M/N Seal:1400 rpm; Grease Lubrication - B/C/O Seal:1100 rpm; Shaft Size Type:Imperial; Dimension S:3.23 in;

Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Black Oxide Coating; Height H(mm):20 ～ 30; Lateral Width L(mm):38; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Seals:DD (Contact Rubber S; RoHS:6; Type:Bearings with Housin;

Designation of housing:PA209N-; Designation of bearing:UC209-27G2; S:19 mm; Recommended tightening torque for set screw:8 Nm; A1:32 mm; C0:20.8 kN; d:42.86 mm; C:31.85 kN; N:M14; Weight:2.14 kg;

m:13 mm; T max.:100 °C; d1:127 mm; T min.:-20 °C; B1:109.5 mm; G:M16x1,5; SW:8 mm; C:46 mm; Recommended tightening torque for set screw:64 Nm; C0:96.5 kN;

G2 - Heat Generation Factor (Rib-Roller End):37.2; Cage Type:Stamped Steel; R - Cone Backface To Clear Radius1:0.14 in; D:6.6250 in; D1 - Flange Outer Diameter:6.9030 in; da - Cone Frontface Backing Diameter:4.17 in; T1 - Bearing Width:1.625 in; C - Cup Width:1.1875 in; K - Factor7:1.24; Bearing Wei

Fatigue limit load, Cu:121 kN; b:14.9 mm; Characteristic outer ring frequency, BPF0:7.61 Hz; Radial clearance class:C3; Da max:276 mm; Dynamic load, C:1,550 kN; Characteristic cage frequency, FTF:0.42 Hz; Number of lubrication holes:3; B:104 mm; ra max:2.5 mm;

Lateral Width L(mm):91; Bearing Retained:Yes (with retaining; Height H(mm):40 ～ 80; Number of Bearings:Single; Bearing Part Number:6806; Number of Bearings:Single; Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Seals:DD (Contact Rubber S; Housing Material:1045 Carbon Steel;

Cup Part Number:592DC; Design Units:Imperial; Cone Part Number:590A; Y2 - ISO Factor10:2.27; T - Bearing Width across Cones:3.2500 in; e - ISO Factor8:0.44; R - Cone Backface To Clear Radius1:0.14 in; C - Double Cup Width:2.5 in; Y1 - ISO Factor9:1.53; db - Cone Backface Backing Diameter:3.74 in;

Type:Ball; Precision:Grade 5; B:16; Inner/Outer Ring Material:Steel; Accuracy Symbol:P5; Bearing Style:Rubber Sealed; Days to Ship:Quote; Max. Allowed rpm(rpm):8400; Type:Ball; Size Standards:Metric System;

Recommended tightening torque for set screw:22 Nm; d1:74.5 mm; A1:20 mm; G:M6x1; A:43 mm; T max.:100 °C; J:184 mm; T min.:-40 °C; Weight:3.56 kg; N:16mm;