Pillow Block Bearings

Contact Now

Mounting holes or slots in the base or feet of pillow block bearings permit adjustment and easy mounting.Pillow blocks are supplied in a variety of configurations.Pillow block bearings are a typical style of bearing. These bearings are composed of a self-aligning ball bearing (the commonly used type) and plummer block. They can be attached to a shaft by fastening a ball retaining screw.

 

 

Pillow block bearings, sometimes referred to as plummer block bearings, are mounted bearings that are used to provide load support for a rotating shaft. Their mounting surface is on a plane parallel and offset to the axis of the shaft. Pillow Block Bearings Pillow blocks, the most commonly used type of mounted units, are designed to provide shaft support where the mounting surface is parallel to the shaft axis. The bolt holes are usually slotted for adjustment during mounting.

 


 

3.188 Inch | 80.975 Millimeter x 4.375 Inch | 111.13 Millimeter x 3.75 Inch | 95.25 Millimeter LINK BELT PKB22451E7 Pillow Block Bearings

10.6 kN 60.25 mm
1 4.1 cm³

2 Inch | 50.8 Millimeter x 3.125 Inch | 79.38 Millimeter x 2.25 Inch | 57.15 Millimeter LINK BELT PKB22432EK618S Pillow Block Bearings

4500 RPM Round
ANSI/ABMA STD 9 Two-Bolt Flange

2.188 Inch | 55.575 Millimeter x 3.313 Inch | 84.14 Millimeter x 2.5 Inch | 63.5 Millimeter LINK BELT PB22435FHHC Pillow Block Bearings

3-3/16 to 3-1&# 2 in
019250 CP

2.188 Inch | 55.575 Millimeter x 3.313 Inch | 84.14 Millimeter x 2.5 Inch | 63.5 Millimeter LINK BELT PB22435H18W4 Pillow Block Bearings

Expansion Bearing &# Lubrication Fitting
Four-Bolt Base 071737

2.938 Inch | 74.625 Millimeter x 4.875 Inch | 123.83 Millimeter x 3.5 Inch | 88.9 Millimeter LINK BELT PEB22547FH Pillow Block Bearings

RoHS, REACH, DRC Con 3-7/8 in
Sintered Bronze Oil- 9001:2008 &

2.438 Inch | 61.925 Millimeter x 3.5 Inch | 88.9 Millimeter x 2.75 Inch | 69.85 Millimeter LINK BELT PB22439E Pillow Block Bearings

Black Oxide Set Screw
UL, AFBMA, AGMA, ASM Normal Duty
1/11