Take Up Unit Bearings

Contact Now

Take-up units are used where shaft adjustment and belt tightening devices are required, such as conveyor applications. With a choice of locking systems, this cast-iron style is used for standard duty and pressed-steel design for low-cost, light-duty applications.The take up mounted units are either made of stainless steel or pressed steel. The units consist of a housing and a bearing insert and run a very long time because of their industrial strength and high-quality design. The industrial bearings reduce the friction in the unit and should run quietly when installed properly into the machine or unit.

 

 

Take-Up Units. Take-up units are used where shaft adjustment and belt tightening devices are required, such as conveyor applications. With a choice of locking systems, this cast-iron style is used for standard duty and pressed-steel design for low-cost, light-duty applications.

 

 

Bearing Number Bore Dia Outer DIa Width Size
QM INDUSTRIES QAATU15A211SO Take Up Unit Bearings 0.47 kN Deep Groove 0.147 No
QM INDUSTRIES QAATU15A211SEN Take Up Unit Bearings 16.8 Nm 64 mm -20 °C 300 mm
QM INDUSTRIES QAATU15A211SB Take Up Unit Bearings 82 mm 5.16 kg R1/8" 61.91 mm
QM INDUSTRIES QAATU10A200SEO Take Up Unit Bearings 20 mm 133 Volume_cmc 65 Nm 282.5 mm
QM INDUSTRIES QVVTU22V400SEB Take Up Unit Bearings 19.5 kN 116.5 mm 27 mm 80
QM INDUSTRIES QVVTU22V312ST Take Up Unit Bearings Setscrew Ball Bearin Yes Self Centering Steel
QM INDUSTRIES QAATU10A115SEO Take Up Unit Bearings Cast Iron Standard Tapered Adapter Slee Baldor-Dodge
QM INDUSTRIES QVVTU22V312SEO Take Up Unit Bearings Non/No 95 mm P0 NTN
QM INDUSTRIES QAATU15A215SO Take Up Unit Bearings M6x1 98 mm 39.6 mm 125 mm
QM INDUSTRIES QAATU13A207SO Take Up Unit Bearings 2.9 LB Eccentric Collar No Steel
QM INDUSTRIES QVVTU22V311SET Take Up Unit Bearings NTN 7 mm 0.787 Inch | 20 Mill No
QM INDUSTRIES QATU13A208SEO Take Up Unit Bearings Standard Powder Coat Self Centering Steel
1/11